Zadigusbdriverforbflasic WORK
DOWNLOAD ->->->-> https://urluso.com/2tyDFS
How to Install Zadig USB Driver for BFL ASIC Devices on Windows
If you have a BFL ASIC device, such as a Butterfly Labs Bitcoin miner, you may need to install a generic USB driver to access it on Windows. Zadig is a free and open source utility that can help you do that easily and quickly. Zadig can install drivers such as WinUSB, libusb-win32, libusbK, or libusb0.sys, which are compatible with libusb-based applications. In this article, we will show you how to use Zadig to install a USB driver for your BFL ASIC device on Windows.
What You Need
A BFL ASIC device connected to your computer via USB.
A Windows computer running Windows 7 or later. Windows XP and Vista are not supported.
Zadig utility downloaded from https://zadig.en.lo4d.com/windows. Make sure you download the version that matches your Windows version.
How to Install Zadig USB Driver for BFL ASIC Devices on Windows
Run Zadig as administrator by right-clicking on the executable file and selecting \"Run as administrator\".
Select \"Options\" from the menu bar and check \"List All Devices\". This will show all the connected USB devices in the drop-down menu.
Select your BFL ASIC device from the drop-down menu. It may have a name like \"Butterfly Labs Single\" or \"Butterfly Labs Monarch\". If you are not sure which one is your device, you can unplug and plug it back in and see which one disappears and reappears in the list.
Select the driver you want to install from the right-hand side. You can choose WinUSB, libusb-win32, libusbK, or libusb0.sys. WinUSB is recommended for most cases, but you can try other drivers if WinUSB does not work for you.
Click on \"Replace Driver\" or \"Install Driver\" depending on whether you already have a driver installed or not. Zadig will ask for your confirmation and then proceed to install the driver.
Wait for the installation to finish. You should see a message saying \"The driver was installed successfully\" or something similar.
Close Zadig and restart your computer if prompted.
How to Verify Zadig USB Driver Installation
To verify that Zadig has installed the driver correctly, you can use a libusb-based application to access your BFL ASIC device. For example, you can use CGMiner or BFGMiner to mine Bitcoins with your device. You can also use Device Manager to check the driver details of your device. To do that:
Open Device Manager by pressing Windows key + R and typing \"devmgmt.msc\".
Expand the \"Universal Serial Bus devices\" category and find your BFL ASIC device. It should have a name like \"WinUSB Device\" or \"libusb-win32 Device\" depending on the driver you installed.
Right-click on your device and select \"Properties\".
Go to the \"Driver\" tab and check the driver details. You should see the driver name, provider, date, version, etc.
If everything looks correct, click on \"OK\" and close Device Manager.
Troubleshooting Zadig USB Driver Installation
If you encounter any problems with Zadig or the driver installation, here are some tips to help you troubleshoot:
If Zadig does not detect your device, make sure it is connected properly and powered on. Try using a different USB port or cable if possible.
If Zadig shows a warning message about replacing a system driver, such as HID or Mass Storage, do not proceed unless you know what you are doing. Replacing a system driver may cause your device or other devices to stop working properly.
If Zadig fails to install the driver or shows an 061ffe29dd